Available 24/7 via chat
Available 24/7 via chat
Pricing Notice
The air intake system is essentially the same in all vehicles with minor design differences. Its main function is to deliver clean, cool air to the engine for combustion, which is crucial for performance, efficiency, and engine longevity. Key parts found in most vehicle air intake systems include:
Air Filter: Traps dirt, dust, and debris, ensuring only clean air enters the engine.
Mass Air Flow (MAF) Sensor: Measures the amount and quality of air entering the engine so the ECU can balance the air-fuel ratio.
Intake Tube/Ducts: Pathways that direct filtered air toward the engine, designed to minimize losses and turbulence.
Throttle Body: Controls how much air enters the intake manifold, responding to driver input via the gas pedal.
Intake Manifold/Plenum: Distributes air evenly to each engine cylinder for combustion.
Constructed with 100-percent polyurethane on top and bottom, this high flow, oiled performance filter is our highest flowing media for improved hor...
View full detailsConstructed with 100-percent polyurethane on top and bottom, this high flow, oiled performance filter is our highest flowing media for improved hor...
View full detailsWith three layers of progressively finer mesh synthetic media between 100% polyurethane top and base, this high flow, "oil-free" conical performanc...
View full detailsRoush 2024 Ford Mustang GT / Dark Horse 5.0L Air Intake System
The newly-designed ROUSH Performance Cold Air Intake for the 2019-2023 5.0L V8 F-150 engine brings great performance increases, achieved with an in...
View full detailsUnleash the hidden power in your naturally aspirated 2005-2009 Mustang GT 4.6L V8 with this easy-to-install cold air intake kit from ROUSH Performa...
View full detailsThis Mustang Cold Air Intake Kit from ROUSH fits 2005-2009 models with the 4.0L V6 Engine, and features the ROUSH air filter, air dam and induction...
View full detailsHot Cams Valves are forged from a single blank with improved grain flow to enhance the mechanical characteristics of the valve without welding.
Hot Cams Valves are forged from a single blank with improved grain flow to enhance the mechanical characteristics of the valve without welding.
This camshaft is designed and dyno-proven in the USA, ensuring top-tier performance and reliability. Utilizing state-of-the-art valvetrain software...
View full detailsThis camshaft is designed and dyno-proven in the USA, ensuring top-tier performance and reliability. Utilizing state-of-the-art valvetrain software...
View full detailsThis camshaft is designed and dyno-proven in the USA, ensuring top-tier performance and reliability. Utilizing state-of-the-art valvetrain software...
View full detailsEdelbrock part #75613 RPM Air-Gap 2-O intake manifold is designed for street 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 an...
View full detailsEdelbrock part #70855 Victor EFI Tunnel Ram base is a modern updated design to our very successful Victor Ram 2-R Tunnel Ram, which was first relea...
View full detailsThe CORSA Performance Limited Edition C7 Z06 Corvette air intake is made from pure 100% red carbon fiber construction and pairs aesthetics and desi...
View full detailsThis coupling features a 30° angle and is designed to connect to tubes with a 3-7/8” and 4-3/8” diameter. It’s commonly used on aFe POWER cold air ...
View full detailsThis 4” long coupling is designed to connect to tubes with a 3” and 2-3/4” diameter. It’s commonly used on aFe POWER cold air intake systems, but c...
View full detailsMagnum FORCE Cold Air Intake System Spare Parts Kit (3-1/8 IN ID to 3 IN x 3-1/2 IN L) Straight Reducing Bellow-Coupler - Red
Magnum FORCE Cold Air Intake System Spare Parts Kit (3 IN ID to 2-1/4 IN ID x 35 Deg.) Elbow Reducing Coupler - Black
Magnum FORCE Cold Air Intake System Spare Parts Kit (4-3/8 IN ID to 3-3/4 IN ID x 30 Deg.) Elbow Reducing Coupler - Black
Magnum FORCE Cold Air Intake System Spare Parts Kit (3 IN ID to 2-1/2 IN ID x 3 IN L) Straight Reducing Coupler - Black
5 IN to 4-1/2 IN Reducer: This 3-1/4 IN long coupling is designed to connect to tubes with a 5 IN and 4-1/2 IN diameter. It's commonly used on aFe ...
View full details3-13/16 IN Internal Diameter: This coupling is designed to connect to a tube with a 3-13/16 IN diameter. It's commonly used on aFe POWER cold air i...
View full details2-1/4 IN Internal Diameter: This 1-1/2 IN long coupling is designed to connect to a tube with a 2-1/4 IN diameter. It's commonly used on aFe POWER ...
View full details$150.00 away from free shipping!
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}