ELDERBROCK

Race Extreme 1.660" OD Triple Springs, 2.100" Installed Height, 16 Springs

Radius .135" Wall pushrods also have the same diameter oil holes as standard pushrods to ensure correct oil flow. They are OD ground for consistenc...

With .050" oil holes on the ends, these Hi-Tech 5/16" one piece 7.700" long pushrods feature an .080" wall thickness and restricts oil flow to the ...

A vacuum reserve canister captures an extra shot of vacuum from your engine for your power brakes. The COMP Cams Vacuum Canisters are for cars equi...

A vacuum reserve canister captures an extra shot of vacuum from your engine for your power brakes. The COMP Cams Vacuum Canisters are for cars equi...

The Ultra Pro Magnumâ„¢ XD Rocker Arms are engineered from durable 8650 Steel that outlasts and outperforms other inferior knock-off and import Roc...

Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small ...

Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small ...

BBC - 1965-66 396 c.i.d. models have an oiling groove in the rear journal. The listed part numbered cams will not fit these models, so if you requi...

Fits Ford Small Block Engines originally equipped with "Old" firing order and 351 Windsor engines with the "Windsor" firing orderThis Part Fits: Y...

Street/bracket racing. 10.5:1+ compression, 3500+ stall, 4.10 or lower gears. Headers, good intake and heads. Radical idle.This Part Fits: Year Ma...

Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small ...

The HRT Camshaft Series uses the newest and most advanced lobe designs from COMP Cams in order to produce some of the highest average power and tor...

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong e...

The Pushrod is one of the most important pieces of the valve train, but all too often it's taken for granted. pushrods not only have to be strong e...

High performance street/strip, needs 9:1 compression, 2500+ stall. Intake, gears, and headers. Rough idle.

The Comp Cams Ultra ARC Aluminum Series Rocker Arms increase engine power, improve valvetrain stability, and enhance oiling efficiency. Their extru...

Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small ...

CL-KIT - Cam and Lifter Kit Includes: Camshaft, Lifters, Assembly Lube, Decals and Instructions.This Part Fits: Year Make Model Submodel 1987-19...

Street/ strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.This Part Fits: Year Make Model Submodel 1981-19...

Constructed from one piece of seamless .135" wall chromemoly steel then black oxide coated and heat-treated, this 8.750" long Hi-Tech 3/8" diameter...

These short travel retro-fit hydraulic roller lifters feature a short travel. These lifters' short travel allows for light pre-load and reduced oil...

Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small ...

CL-KIT - Cam and Lifter Kit Includes: Camshaft, Lifters, Assembly Lube, Decals and Instructions.This Part Fits: Year Make Model Submodel 1966-19...