Whipple Siemens Deka 80LB/HR Fuel Injector Set Long
These injectors flow 80 lbs/hr at 43.5 PSI ( 3 BAR ) and even more at greater PSI! These are standard in many custom marine applications. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
These injectors are able to function at high fuel pressures and donÕt exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.
Specifications:
Fuel Pressure Range: 40-90 psi
Minimum Pulse Width: 1.5 ms
Maximum Duty Cycle: 93%
Coil Impedance: 12.0 ohm
Injector Type: Siemens Deka (short/60mm)
Connector Type: minitimer
Proposition 65
/!\ warningWARNING: Cancer and Reproductive Harm
https://www.P65Warnings.ca.gov
Limited Time Offer:
0
Translation missing: en.additions.countdown_timer.days_label
0
Translation missing: en.additions.countdown_timer.hours_label
0
Translation missing: en.additions.countdown_timer.min_label
0
Translation missing: en.additions.countdown_timer.sec_label
Siemens Deka 80LB/HR Fuel Injector Set Long - INJ-80L
WHIPPLESUPERCHARGES