Available 24/7 via chat
Available 24/7 via chat
Pricing Notice
The air intake system is essentially the same in all vehicles with minor design differences. Its main function is to deliver clean, cool air to the engine for combustion, which is crucial for performance, efficiency, and engine longevity. Key parts found in most vehicle air intake systems include:
Air Filter: Traps dirt, dust, and debris, ensuring only clean air enters the engine.
Mass Air Flow (MAF) Sensor: Measures the amount and quality of air entering the engine so the ECU can balance the air-fuel ratio.
Intake Tube/Ducts: Pathways that direct filtered air toward the engine, designed to minimize losses and turbulence.
Throttle Body: Controls how much air enters the intake manifold, responding to driver input via the gas pedal.
Intake Manifold/Plenum: Distributes air evenly to each engine cylinder for combustion.
The Edelbrock #9641 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Hard-chr...
View full detailsThe Edelbrock #9640 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Hard-chro...
View full detailsThe Edelbrock #9376 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Hard-chr...
View full detailsThe Edelbrock #9375 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Hard-chro...
View full detailsThe Edelbrock #9371 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Hard-chr...
View full detailsThe Edelbrock #9370 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Hard-chro...
View full detailsThe Edelbrock #9366 Intakes Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Hard-chr...
View full detailsThe Edelbrock #9365 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel valves with undercut stems for increased flow. Hard-chro...
View full detailsThe Edelbrock #9361 Intake Valves are 1-piece, swirl-polished, hardened tip stainless steel Valves with undercut stems for increased flow. Hard-chr...
View full detailsThe Edelbrock #9360 Intake Valve are 1-piece, swirl-polished, hardened tip stainless steel Valves with undercut stems for increased flow. Hard-chro...
View full detailsEdelbrock part #8028 Waterneck Adapter is designed for 1986 and later big-block Chevy, when installing Edelbrock #2161 or #3761 intake manifold.
Edelbrock part #7594 RPM Air-Gap intake manifold is designed for street and high performance 308-383 c.i.d. Holden V8 engines that utilize the 1988...
View full detailsEdelbrock part #7585 RPM Air-Gap Dual-Quad 351W intake manifold is designed for 351W small-block Fords. This intake offers performance improvements...
View full detailsEdelbrock part #7581 RPM Air-Gap 351W intake manifold is designed for street and high performance 351-427 c.i.d. 351W Ford V8 applications. The RPM...
View full detailsEdelbrock part #7577 RPM Air-Gap Magnum intake manifold is designed for 1992 & later 5.2L (318 c.i.d.) and 1993 & later 5.9L (360 c.i.d.) C...
View full detailsEdelbrock part #7576 RPM Air-Gap intake manifold is designed for 340-360 c.i.d. Chrysler V8's and 318 c.i.d. engines with 340-360 cylinder heads. T...
View full detailsEdelbrock part #7566 RPM Air-Gap 460 intake manifold is designed for street and high performance 429/460+ c.i.d. Ford V8's with standard or Cobra J...
View full detailsEdelbrock part #75641 RPM Air-Gap 351C intake manifold design utilizes the same race-winning technology that's been used on Edelbrock's Victor Seri...
View full detailsThe Edelbrock RPM Air-Gap 2-R #7562 intake manifold is designed for street 396-502 c.i.d. Chevrolet V8's with high-performance rectangular-port hea...
View full detailsEdelbrock part #7561 RPM Air-Gap 2-O intake manifold is designed for street 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and...
View full detailsEdelbrock part #7551 Performer RPM Air-Gap Oldsmobile 455 intake manifold is intended for aggressive street/ strip big-block Oldsmobile application...
View full detailsEdelbrock part #7535 RPM Air-Gap Dual-Quad is designed for 289-302-347 c.i.d. small-block Fords. This is a dual plane intake manifold which combine...
View full detailsEdelbrock part #7531 RPM Air-Gap AMC intake manifold is designed for 1970-91 304-401 c.i.d. V8 applications. The RPM Air-Gap intake manifold incorp...
View full detailsEdelbrock part #7530 RPM Air-Gap AMC intake manifold is designed for 1967-69 290-390 c.i.d. V8 applications. This RPM Air-Gap intake manifold incor...
View full details$150.00 away from free shipping!
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}